Wood Boiler Chemical

Ideal for outdoor wood boilers. This is the best chemistry for your out wood boiler.

• Easy to handle container.
• Comes as an all in one blended chemical.
• The Tolyltriazole provided corrosion protection of your bronze and copper pipes.
• The Silicate and borate for corrosion protection of you aluminum.
• The Nitrite provides superior corrosion protection for iron material such as lower grades of stainless steel or iron pipes.
• The red Phenolphtalein Indicator tells you when your pH is in range which makes testing not necessary. Simply add the product until your water turns a light pink color and YOU ARE DONE.
• You can also verify the chemical residual with test strips or a nitrite test kit.
• Check water redness every month to ensure you have not loss any water.
• The redness allows for easy leak detection.
• Glycol compatible.
• Product quality insured up to $3,000,000.
• ISO manufactured.
• Refresh with smaller order quantities.
• Store in a cool, dark area to minimize the damage to the Phenolphtalein.
• 1 Gallon treats 250 to 500 gallons of fresh water.

This chemistry was introduced to the market in 2008. We have sold over 5,000 units to independent wood boiler owners. ZERO defects, ZERO failures, ZERO complaints.

There are a lot of other chemicals on the market for wood boilers. Trust your chemistry to a Boiler Chemical company and not a wood boiler manufacture! We know chemicals, they know how to make boilers! This is the best corrosion control for your outdoor wood boiler!

What is the difference between a wood boiler and a woodstove boiler chemical?
This product is designed to work in outdoor wood boiler or some people may refer to them as outdoor woodstove boiler systems.

Will this product work in my wood boiler?
This boiler water chemical product is designed to work in all makes and models of outdoor wood furnaces and stoves. It is formulated with Nitrite, Silicate, Tolytriazole, and Borate to provide proper corrosion protection for copper, mild steel, and aluminum materials. The main source of corrosion protect is the nitrite corrosion inhibitor. It may be used with either hard or soft water and is compatible with glycol anti-freezes.

How much will this product treat?
1 gallon of this product will treat approximately 250 to 500 gallons of make-up water (aim more towards 250 gallons, but if you budget is tight you can go up to 500 gallons). It contains a "P" Indicator for ease of proper dosage detection (turns your water a light pink). Just add direct to your system. You may also purchase some easy to use nitrite test strips with your order.

I use to purchase a powder product. Can I still purchase CLC-830?
No. Changes were made with the haz-mat restriction on the CLC-830, so for economical reasons we changed to this formulation.

How do I add the wood boiler chemical to my system?
Just add directly to the water system, until it turns a light pink. This means it drove the pH up to around 10 and you have enough nitrite to passivate the system.

How do I monitor the boiler water?
Check the boiler water color "pink-ness" monthly. It is the same colors, you lost no water and check again next month. If it lost some color becuase you lost water or added a lot of water, use a nitrite test kit or test strips to verify the proper nitrite levels are good. You may have just dropped the pH a bit, but have plenty of nitrite. Maintain 800 to 1200 ppm of sodium nitrite in the water.

Have an ebay account? You may also order your wood boiler chemical on ebay or amazon.

Stocked & Ships Daily from Atlanta, Georgia; Salt Lake City, Utah; and Taylor, Michigan.

This product typically ships if ordered by 3 pm. If you require for it to ship the same day, please indicate so in the notes section upon ordering. We will contact you.

Notes:

• We only ship via Fedex ground. No UPS or USPS.
• We can not ship to PO boxes.
• This map illustrates service schedules in business days as of Dec, 2016 for FedEx Ground shipments.
• ChemWorld is not responsible for delays due to weather or Fedex transit issues. Please take this into account when ordering.

Overnight / Expedite Shipping:

• Orders must be received by noon EST.
• We only ship Fedex expedite shipments. No UPS or USPS.
• To calculate your costs, log into your Fedex Account. Origin zip code is 30144, 48180, and 84119.

Directions for Expedite Shipping:

1. Must order by noon EST.
2. Order as normal through the website.
3. If you have a Fedex Account number, enter it in the notes section during ordering with your exact shipping requirements (Next Day 8:30, Next Day 10:30, Next Day 20:00, Fedex 2 AM, or Fedex Express Saver). You are done. We will email you ASAP.
4. If you do NOT have an Fedex Account number, enter your order as normal and enter your 3 or 4 digit security code in the notes section with your shipping requirements. You are done. We will email you ASAP with the additional costs.

If it is later then noon EST, email us at [email protected]. You can also call in the order at 800-658-7716 and reference exactly what you need. We will contact you.