Stenner SVP1H7A3S

Stenner SVP1H7A3S Variable Speed Pump 100 psi - 2.0 to 40 gpd

The Manual SVP Series is a variable speed metering pump with a DC motor and detachable pump head. The SV output is digitally adjusted to increase or decrease the motor speed. The SVP1 pump is manually adjusted from 5%-100% in 1% increments with the up and down arrows on the keypad. Each may be ordered in 120 and 220 Volt, 60Hz rated at 0 to 25 psi and 26 to 100 psi.  The product codes are: Pump Code (blue), the power type (purple), tube diameter (pink), and tube material (yellow)

Stenner Pump Part Number Breakdown for Model SVP1H-.

S

P

V

1

H

-

Model	Voltage & Hertz	Suction & Discharge Tubing	Tube Material
SPV1H1 SPV1H2 SPV1H7	A= 120V, 60Hz B= 220V, 60Hz	1= 1/4" White    2= 1/4" UV Black    3= 3/8" White    4= 3/8" UV Black	S= Santoprene     T= Tygothane

Manual Variable Speed SPV1H - 100 psi
SVP1H1=0.3-5.0gpd   SVP1H2=0.8-17.0gpd   SVP1H7=2.0-40.0gpd

Tube_Material_Capability_Chart_Download.pdf

Due to the variation, each pump is assembled to order. If you enter in a company name upon ordering (home based companies are included, so please include your name upon ordering to avoid delays), your product will ship from 1 of 3 shipping locations throughout the USA.

If you do not enter a company name, the product must ship to Atlanta.. Lead time will be 5 to 10 days to receive your product if this is the case.

This map below is the Free Shipping ground transit map for Company locations only. The product will ship within 24-48 hours after ordering online. We do not off rush service for this product.