Stenner PumpsStenner Pumps come in multiple gpd both fixed and variable rate. The individual part number provides detailed break down of the pump control, pressure rating, tube number, voltage & hertz, suction & discharge tubing size, and tubing material. Order your Stenner pumps directly online and save!
Needing the pump bleach (Sodium Hypochlroite)? This is the best Bleach pump out there. No worries about priming or gas bubbles! The files below are a complete break down of the Stenner 45 Series Pumps Part Numbers and Chemical Resistant Guide for Stenner 45 Peristaltic Pumps. Use the chemical resistant guide for proper peristaltic pump tube material selection. The individual part number provides detailed break down of the pump control, pressure rating, tube number, voltage & hertz, suction & discharge tubing size, and tubing material.
Stenner 45 Series
Stenner 45 Series Pumps are manufactured in 120V and 220 Volt, 60Hz rated at 0 to 25 psi and 26 to 100 psi. Stenner pump come as a fixed head or adjustable. You may also purchase an optional tank with your Stenner Pump (orange). The product codes are: Pump Code (blue), the power type (purple), tube type (pink), and tube material (yellow)
Stenner Pump Part Number Breakdown for Model 45MJL-, 45MJH-, 45MFL-, and 45MFH-.
Optional Tank
Number
| Model | Voltage &
Hertz
| Suction &
Discharge
Tubing
| Tube
Material
|
S7G = 7.5 Gal, UV Gray
S7N = 7.5 Gal, White
S1G =15 Gal, UV Gray
S1N = 15 Gal, White
S3G = 30 Gal, UV Gray
S3N = 30 Gal, White
| 45MJL-
45MJH-
45MFL-
45MFH-
| A= 120V, 60Hz
B= 220V, 60Hz
| 1= 1/4î White
2= 1/4î UV Black
3= 3/8î White
4= 3/8î UV Black
| S= Santoprene
T= Tygothane
|
Fixed Stenner Series 45 - 25 psi
45MFL1=3.0gpd 45MFL2=10.0gpd 45MFL3=22.0gpd 45MFL4=35.0gpd 45MFL5=50.0gpd
Fixed Stenner Series 45 - 100 psi
45MFH1=5.0gpd 45MFH2=10.0gpd 45MFH7=22.0gpd
Adjustable Stenner Series 45 - 25 psi
45MJL1=0.2-3.0gpd 45MJL2= 0.5-10.0gpd 45MJL3=1.1-22.0gpd 45MJL4 =1.7-35.0gpd 45MJL5 = 2.5-50.0gpd
Adjustable Stenner Series 45 - 100 psi
45MJH1=0.2-3.0gpd 45MJH2= 0.5-10.0gpd 45MJH7=1.1-22.0gpd
Stenner Series 85
Stenner Series 85 Single Head Adjustable and Fixed Pumps 0 to 25 psi and 26 to 100 psi, both come in 120 or 220 volt. You may also purchase an optional tank with your Stenner Pump (orange). The product codes are: Pump Code (blue), the power type (purple), tube type (pink), and tube material (yellow).
Stenner Pump Part Number Breakdown for Stenner Series 85: 85MJH-, 85MJL, 85MFL-, and 85MFH-:
Optional Tank
Number
| Model | Voltage &
Hertz
| Suction &
Discharge
Tubing
| Tube
Material
|
S7G = 7.5 Gal, UV Gray
S7N = 7.5 Gal, White
S1G =15 Gal, UV Gray
S1N = 15 Gal, White
S3G = 30 Gal, UV Gray
S3N = 30 Gal, White
| 85MJH-
85MJL-
85MFL-
85MFH-
| A= 120V, 60Hz
B= 220V, 60Hz
| 1= 1/4î White
2= 1/4î UV Black
3= 3/8î White
4= 3/8î UV Black
| S= Santoprene
T= Tygothane
|
Adjustable Stenner Series 85 - 25 psi
85MJL1=0.3-5.0gpd 85MJL2=0.8-17.0gpd 85MJL3=2.0-40.0gpd 85MJL4=3.0-60.0gpd 85MJL5=4.3-85.0gpd
Adjustable Stenner Series 85 - 100 psi
85MJH1=0.3-5.0gpd 85MJH2=0.8-17.0gpd 85MJH7=2.0-40.0gpd
Fixed Stenner Series 85 - 25 psi
85MFL1=5.0gpd 85MFL2=17.0gpd 85MFL3=40.0gpd 85MFL4=60.0gpd 85MFL5=85.0gpd
Fixed Stenner Series 85 - 100 psi
85MFH1=5.0gpd 85MFH2=17.0gpd 85MFH7=40.0gpd
Stenner Series 100
Stenner Series 100 Fixed and Adjustable Dual Head Pumps. It comes in 120
and 220 Volt, 60Hz rated at 0 to 25 psi and 26 to 100 psi. The product
codes are: Pump Code (blue), the power type (purple), tube diameter
(pink), and tube material (yellow)
Stenner Pump Part Number Breakdown for Model 100FL-.
| Model | Voltage &
Hertz
| Suction &
Discharge
Tubing
| Tube
Material
| 100FL-
100FH-
100JL-
100JH-
| A= 120V, 60Hz
B= 220V, 60Hz
| 1= 1/4î White
2= 1/4î UV Black
3= 3/8î White
4= 3/8î UV Black
| S= Santoprene
T= Tygothane
|
Fixed Dual Head Stenner Series 100FL - 25 psi
100FL1=6.0gpd 100FL2=20.0gpd 100FL3=44.0gpd 100FL4=70.0gpd 100FL5=100.0gpd
Fixed Dual Head Stenner Series 100FH - 100 psi
100FH1=6.0gpd 100FH2=20.0gpd
Adjustable Dual Head Stenner Series 100JL - 25 psi
100JL1=0.3-6.0gpd 100JL2=1.0-20.0gpd 100JL3=2.2-44.0gpd 100JL4=3.5-70.0gpd 100JL5=5.0-100.0gpd
Adjustable Dual Head Stenner Series 100JH - 100 psi
100JH1=0.3-6.0gpd 100JH2=1.0-20.0gpd
Stenner Series 170
Stenner Series 170 Fixed and Adjustable Dual Head Pumps. It comes in 120
and 220 Volt, 60Hz rated at 0 to 25 psi and 26 to 100 psi. The product
codes are: Pump Code (blue), the power type (purple), tube diameter
(pink), and tube material (yellow)
Stenner Pump Part Number Breakdown for Model 170FL-.
| Model | Voltage &
Hertz
| Suction &
Discharge
Tubing
| Tube
Material
| 170FL-
170FH-
170JL-
170JH-
| A= 120V, 60Hz
B= 220V, 60Hz
| 1= 1/4î White
2= 1/4î UV Black
3= 3/8î White
4= 3/8î UV Black
| S= Santoprene
T= Tygothane
|
Adjustable Dual Head Stenner Series 170JL - 25 psi
170JL1=0.5-10.0gpd 170JL2=1.7-34.0gpd 170JL3=4.0-80.0gpd 170JL4=6.0-120.0gpd 170JL5=8.5-170.0gpd
Adjustable Dual Head Stenner Series 170JH - 100 psi
170JH1=0.5-10.0gpd 170JH2=1.7-34.0gpd
Fixed Dual Head Stenner Series 170FL - 25 psi
170FL1=10.0gpd 170FL2=34.0gpd 170FL3=80.0gpd 170FL4=1200.0gpd 170FL5=170.0gpd
Fixed Dual Head Stenner Series 170FH - 100 psi
170FH1=10.0gpd 170FH2=34.0gpd
Stenner PumpSeries SVP
The Manual SVP Series is a variable speed metering pump with a DC motor and detachable pump head. The SVPÍs output is digitally adjusted to increase or decrease the motor speed.
The SVP1 pump is manually adjusted from 5%-100% in 1% increments with the up and down arrows on the keypad.
The SVP4 operates in a 4-20 mA mode with an external port to accept an input control signal. The SVP4 pump can override the 4-20mA mode to be manually adjusted.
Each may be ordered in 120 and 220 Volt, 60Hz rated at 0 to 25 psi and 26 to 100 psi. The product codes are: Pump Code (blue), the power type (purple), tube diameter (pink), and tube material (yellow)
Stenner Pump Part Number Breakdown for Model SVP-.
| Model | Voltage &
Hertz
| Suction &
Discharge
Tubing
| Tube
Material
|
SPV1L-
SPV4L-
SPV1H-
SPV4H-
| A= 120V, 60Hz
B= 220V, 60Hz
| 1= 1/4î White
2= 1/4î UV Black
3= 3/8î White
4= 3/8î UV Black
| S= Santoprene
T= Tygothane
|
Manual Variable Speed SPV1L - 25 psi
SVP1L1=0.3-5.0gpd SVP1L2=0.8-17.0gpd SVP1L3=2.0-40.0gpd SVP1L4=3.0-60.0gpd SVP1L5=4.3-80.0gpd
4 to 20 mAmp Variable Speed SPV4L - 25 psi
SVP4L1=0.3-5.0gpd SVP4L2=0.8-17.0gpd SVP4L3=2.0-40.0gpd SVP4L4=3.0-60.0gpd SVP4L5=4.3-85.0gpd
Manual Variable Speed SPV1H - 100 psi
SVP1H1=0.3-5.0gpd SVP1H2=0.8-17.0gpd SVP1H7=2.0-40.0gpd
4 to 20 mAmp Variable Speed SPV4H - 100 psi
SVP4H1=0.3-5.0gpd SVP4H2=0.8-17.0gpd SVP4H3=2.0-40.0gpd SVP4H4=3.0-60.0gpd SVP4H5=4.3-85.0gpd
Stenner Proportional Injection System
The Stenner Proportional Injection System doses solution that is proportional to the systemÍs flow rate based on water volume. The water meter sends a signal to the PCM which actuates the pump. The system is suited for constant pressure (variable speed) well pumps, poultry and livestock houses, irrigation, systems with demand based backup wells and any application with varying flow rates.
The primary components are the PCM (pages 30 & 31), Classic Series single head fixed output pump (pages 2-7) and a 3/4" dry contact bronze water meter (page 33). The components are pre-assembled on a panel and include
wall mounting brackets for quick installation and equipment accessibility. The cabinet keeps the cords and wires contained. Unions provide easy installation and removal. A flow indicator (page 44) is also installed as a visual reference to confirm solution is pumping. The Proportional Injection System is available as a Single or a Dual with two pumps, and two PCMs.
Stenner Pump Part Number Breakdown for Model BDF.
| Model | Pump Size | Pump &
PCM Voltage
| PCM | Water Meter
| S = Single
D = Dual
| 03= 3 gpd pump
05= 5 gpd pump
10 = 10 gpd pump
17 = 17 gpd pump
22 = 22 gpd pump
40 = 40 gpd pump
| 1= 120V, 60 Hz
| 01 = PCM1
05 = PCM5
10 = PCM10
20 = PCM20
| 751G = 3/4" 1 Gallons/Pulse
752P = 3/4" 2 Pulses/Gallon
752P = 3/4"4 Pulse/Gallon
|
PCM1 = 0.1-1.0sec PCM5 = 0.5-5.0sec PCM10 = 1.0-10.0sec PCM20 = 2.0-20.0
Note: Additional pulse rates available with two week lead time, contact factory.
BDF Series Series
The BDF Series metering pump is built with a low rpm motor and a detachable pump head. The pump has a fixed rpm motor which is activated by dip switches to inject scheduled daily doses of solution to a maximum of 21 ounces per event up to 25 psi. The BDF 24
|
