|
|
|
|
|
|
Closed Loop Corrosion Inhibitor - Clear - 5 to 55 Gallons
|
|
|
Closed Loop Chemical 338 is a highly concentrated liquid buffered nitrite/ borate/silicate inhibitor for the treatment of hot and cooled closed water systems. The product is used in both low and high temperature systems as well as low pressure boiler systems with limited makeup water. It may be used with either hard or soft water makeup and is compatible with glycol antifreezes. It is not approved for use in USDA regulated facilities.
One gallon of Closed Loop Chemical 338 treats 100 gallons of water.
|
|
|
|
|
|
|
|
|
|
Closed Loop Corrosion Inhibitor with Red Dye - 5 to 55 Gallons
|
|
|
Closed Loop Chemical 338D is a highly concentrated liquid buffered nitrite/ borate/silicate inhibitor for the treatment of hot and cooled closed water systems. The product is used in both low and high temperature systems as well as low pressure boiler systems with limited makeup water. It may be used with either hard or soft water makeup and is compatible with glycol antifreezes. It is not approved for use in USDA regulated facilities. Closed Loop Chemical 338D contains a P Indicator dye for ease of detection.
One gallon of Closed Loop Chemical 338D treats 100 gallons of water.
|
|
|
|
|
|
|
|
|
|
Isothiazolin - 5 to 55 Gallons
|
|
|
Isothiazolin is an excellent slimicide for use in recirculating cooling water systems. The product is effective over a wide pH range against a wide range of slime forming bacteria typically found in these systems.
|
|
|
|
|
|
|
|
|
|
45% Glutaraldehyde - 5 to 55 Gallon Containers
|
|
|
DESCRIPTION AND USE
Gluteraldehyde comes in a 45% solution and is considered a highly concentrated microbiocide for use in recirculating cooling water and air washer systems. The product is effective over a wide pH range against slime forming bacteria, sulfate reducing bacteria and fungi. The product functions to kill these microorganisms by reacting with the cell wall. Thus, it possesses many unique features when compared to other materials:
- Very effective over a broad spectrum of organisms.
- Aqueous solution which is relatively safe to handle and is easily diluted and mixed when treating.
- Unlike most non oxidizing biocides, it will function to clean up a biologically fouled system.
- Functions over wide pH and temperature ranges and will not react with the wide range of inhibitors and anionic dispersants used in modern cooling water treatment.
- It is non surface active and therefore will not foam when used.
CHEMICAL FEEDING AND CONTROL
When a system is noticeably fouled, BioGuard 46 should be slug dosed to establish a concentration of 50 to 100ppm actives in the recirculating water (i.e. 4.6 9.2 fl. ozs/100 gals. contained water). Once control is evident, a dosage of 20 to 50ppm (1.8 4.6 fl. ozs/100 gals.) on a weekly basis will normally maintain control unless unusual conditions develop.
|
|
|
|
|
|
|
|
|
|
Closed Loop Chemical 1138
|
|
|
Powdered buffered nitrite/borate/silicate inhibitor for the treatment of closed water systems.
|
|
|
|
logo to enjoy free shipping on selected items throughout the store. 
